3D Shop

3D ReBuilder is the most efficient tool to create a usable mesh from a cloud of digitised points. The more the points, the better 3D ReBuilder compares with other programs.

You may improve the quality of the first results or the quality of imported meshes such as STL or VRML files.

The user interface of 3D Shop allows an easy access to this expert tool which is perfectly complemented by the functionalities of 3D SURF, 3D Doctor, and 3D STL

Figure 1: Mesh done with traditional software. All the points are meshed and the result is difficult to use.	Figure 2: 3D ReBuilder creates directly a mesh as light as possible. The triangles are created with a size adapted to the curvature of the shape.

*Figure 3 : this mesh comes from a stamping tool. There is a lot of noise in this model.*	*Figure 4 : after smoothing and reorganisation, the surface state has greatly been improved. The distortion of the surface is less than 0.1mm.*


Figure 5: Combination of decimation and reorganisation provide a means to drastically reduce the number of triangle, even in the case of very complex shapes with number of small radii and sharp angles.